snmp-server enable traps

Syntax

To enable and configure trap severity level on a global basis:

[ no ] snmp-server enable traps [ trapCategory | snmp authentication ]
[ trapfilters trapFilter ]

To specify the trap severity level on a per-category basis:

snmp-server enable traps { trapCategory | snmp authentication } per-category-trapFilters trapFilter

Release Information

Command introduced before JUNOSe Release 7.1.0.
ip keyword added in JUNOSe Release 7.1.0.
packetMirror keyword added in JUNOSe Release 7.2.0.
per-category-trapFilters keyword added in JUNOSe Release 9.3.0.

Description

Enables and configures global and category-level SNMP trap generation. The no version disables SNMP trap generation globally. There is no no version for the command to specify the trap severity level on a per-category basis.

Options

  • trapCategory—SNMP trap category
    • addrPool—Local address pool traps
    • atmPing—E-series router proprietary ATM ping traps
    • bfdmib—BFD MIB traps
    • bgp—BGP state change traps
    • bulkstats—Bulkstats file full and nearly full traps
    • cliSecurityAlert—Security alerts traps
    • dhcp—DHCP traps
    • dismanEvent—Distributed management (disman) event traps
    • dosProtectionPlatform—DoS protection platform traps
    • dvmrp—DVMRP traps
    • dvmrpProp—E-series router proprietary DVMRP traps
    • environment—Power, temperature, fan, and memory utilization traps
    • fileXfer—File transfer status change traps
    • haRedundancy—High availability and redundancy traps
    • inventory—Router inventory and status traps
    • ip—Internet Protocol traps
    • ldp—LDP traps
    • link—SNMP linkUp and linkDown traps
    • log—System log capacity traps
    • mobileIpv4—Mobile IPv4 traps
    • mplste—Mplste traps
    • mrouter—Mrouter traps
    • ntp—E-series router proprietary traps
    • ospf—OSPF traps
    • packetMirror—Secure packet mirroring traps; visible only if packet mirroring is enabled
    • pim—PIM traps
    • ping—Ping operation traps (in disman remops MIB)
    • radius—RADIUS authentication and authorization servers
    • routeTable—Maximum route limit and warning threshold traps; when this trap is generated, the actual value of the exceeded warning threshold is displayed
    • sonet—SONET traps
    • snmp—SNMP coldStart, warmStart, link, and authenticationFailure traps
    • traceroute—Traceroute operation traps (in disman remops MIB)
    • vrrp—VRRP traps
  • snmp—Specifies the SNMP coldStart, warmStart, and authenticationFailure traps
  • authentication—Specifies the SNMP authenticationFailure trap
  • trapFilters—Specifies the trap severity level at a global level; if the per-category trap severity level is not set for a particular category, this setting is applied to that category
  • trapFilter—Minimum severity level for filtering traps at a global level or for a specified category
    • emergency—Severity level 0
    • alert—Severity level 1
    • critical—Severity level 2
    • error—Severity level 3
    • warning—Severity level 4
    • notice—Severity level 5
    • informational—Severity level 6
    • debug—Severity level 7
  • per-category-trapFilters—Specifies the trap severity level for a particular category; this setting overrides the severity level set at the global level for this category
  • trapFilter—Minimum severity level for filtering traps for the specified category

Global Configuration