Viewing Core Dump Monitor Status

To view information about core dump monitor status and configuration, use the show exception monitor command.

show exception monitor

• Use to display information about the core dump monitor status and configuration.
• Field descriptions
  • Core dump monitor—Status (enabled or disabled) of the core dump monitor
  • Next dump monitor check time—Time at which the core dump monitor will next check for any new core dump files
  • Host—IP address of the FTP host on which the core dump monitor saves core dump files
  • Directory—Directory or directory path on the host to where the core dump files are located
  • Core dump monitor interval—Time interval (in minutes) at which the core dump monitor checks for any new core dump files
  • Files on flash which have been transferred—A list of core dump files in the router NVS that have already been transferred to the FTP host
  • Files on flash which have not been transferred—A list of core dump files in the router NVS that have not yet been transferred to the FTP host
• Example

  host1#show exception monitor
  Core dump monitor is enabled
  Next dump monitor check time: WED AUG 16 2003 15:50:38 UTC
  Host: 10.10.120.99
  Directory: monitor
  Core dump monitor interval(minutes): 10

  Files on flash which have been transferred
  ------------------------------------------
  standby:OC12Atm(P2)_5_IC_ERX-10-16-5b_09_15_2002_11_59.dmp
  SRP-5GPlus_1_SC_tImBo-lAb-3_09_18_2002_19_39.dmp

  Files on flash which have not been transferred
  ----------------------------------------------
  standby:SRP-10Ge_1_SC_ERX-10-24-36_09_24_2002_11_04.dmp
  OC12-SERVER_5_FC1_E_ERX-10-24-36_03_28_2003_12_44.dmp
  E3_1_IC_ERX-10-0f-ab_10_08_2002_16_10.dmp

• See show exception monitor.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.