[Contents] [Prev] [Next] [Index] [Report an Error]

Tunnel Server Configuration Mode

In this mode, you can configure (provision) the maximum number of tunnel-service interfaces to be used on a dynamic tunnel-server port.

From Global Configuration mode, type tunnel-server and the slot number and port number of the dynamic tunnel-server port, and press Enter.

host1(config)#tunnel-server 2/2
host1(config-tunnel-server)#?
  default         Set a command to its default(s)
  do              Run an exec mode command (alias command run)
  exit            Exit from the current command mode
  help            Describe the interactive help system
  log             Configure logging settings
  macro           Run a CLI macro
  max-interfaces  Configure maximum number of tunnel-server interfaces for
                  dynamic server port
  no              Negate a command or set its default(s)
  run             Run an exec mode command (alias command do)
  sleep           Make the Command Interface pause for a specified duration

[Contents] [Prev] [Next] [Index] [Report an Error]