[Contents] [Prev] [Next] [Index] [Report an Error]

Tunnel Group Tunnel Configuration Mode

In this mode, you can configure attributes for a tunnel group tunnel.

From Tunnel Group Configuration mode, type tunnel and the tag number (in the range 1–31) for the tunnel, and press Enter.

host1(config-tunnel-group)#tunnel 1
host1(config-tunnel-group-tunnel)#?
  address         Configure tunnel endpoint address
  client-name     Configure the client hostname of the tunnel
  default         Set a command to its default(s)
  do              Run an exec mode command (alias command run)
  exit            Exit from the current command mode
  help            Describe the interactive help system
  identification  Configure tunnel identification
  log             Configure logging settings
  macro           Run a CLI macro
  max-sessions    Configure maximum sessions for this tunnel
  medium          Configure tunnel medium
  no              Negate a command or set its default(s)
  password        Configure tunnel password
  preference      Configure tunnel preference
  receive-window  Configure the receive window size for this tunnel
  router-name     Configure the virtual-router for the domain name
  run             Run an exec mode command (alias command do)
  server-name     Configure the remote hostname for the tunnel
  sleep           Make the Command Interface pause for a specified duration
  source-address  Configure tunnel source address
  type            Configure tunnel type

[Contents] [Prev] [Next] [Index] [Report an Error]