Specifying the Type of Performance

After you have installed a suitable combination of line modules, you can specify a different type of performance. To specify the type of performance:

1. Issue the show bandwidth oversubscription command.
2. If the setting is not the one you want, enable or disable bandwidth oversubscription.
3. Reboot the router.

bandwidth oversubscription

• Use to enable bandwidth oversubscription for an ERX-7xx model or ERX-1410 router. Reboot the router after you have issued this command to change the bandwidth oversubscription status.
• By default, bandwidth oversubscription is enabled.
• Example

  host1(config)#bandwidth oversubscription

• Use the no version to disable bandwidth oversubscription. Reboot the router after you have issued this command to change the bandwidth oversubscription status.
• See bandwidth oversubscription.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.