Setting Server Parameters

Setting the server’s contact person and location provides helpful identifiers for the SNMP server. These identifiers are arbitrary and do not affect the server’s function, but they are useful to have.

snmp-server contact

• Use these commands to configure the SNMP server’s contact person and the server’s location.
• The contact is the person who manages the server.
• The location is the server’s physical location.
• Each of these parameters can be up to 64 characters.
• Example

  host1(config)#snmp-server contact Bob Smith

  host1(config)#snmp-server location 3rdfloor

• Use the no version of these commands to clear the contact or location identifier from the SNMP configuration.
• See snmp-server contact.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.