[Contents] [Prev] [Next] [Index] [Report an Error]

QoS Shared Shaper Control Configuration

In this mode, you can configure variables within the simple shared shaper algorithm to control the minimum dynamic rate for all simple shared shapers on the router.

From Global Configuration mode, type the qos-shared-shaper-control command and press Enter.

host1(config)#qos-shared-shaper-control
host1(config-qos-shared-shaper-control)#?
  convergence-factor            Configure how quickly the simple shared shaper
                                converges to a calculated rate
  default                       Set a command to its default(s)
  do                            Run an exec mode command (alias command run)
  exit                          Exit from the current command mode
  help                          Describe the interactive help system
  log                           Configure logging settings
  macro                         Run a CLI macro
  maximum-voql                  Configure the simple shared shaper's maximum
                                virtual output queue length
  minimum-dynamic-rate-percent  Configure the minimum dynamic rate for a simple
                                shared shaper as a percentage of the
                                shared-shaping-rate
  no                            Negate a command or set its default(s)
  reaction-factor               Configure how the simple shared shaper reacts
                                to changes in measured rate
  run                           Run an exec mode command (alias command do)
  sleep                         Make the Command Interface pause for a
                                specified duration

[Contents] [Prev] [Next] [Index] [Report an Error]