[Contents] [Prev] [Next] [Index] [Report an Error]

QoS Parameter Definition Configuration Mode

In this mode, you can configure QoS parameter definitions.

From Global Configuration mode, type the qos-parameter-define command followed by a QosParameterDefinitionName, and press Enter.

host1(config)#qos-parameter-define vpSharedShaper1
host1(config-qos-parameter-define)#?
  controlled-interface-type  Configure the valid interface types controlled by
                             this parameter
  default                    Set a command to its default(s)
  do                         Run an exec mode command (alias command run)
  exit                       Exit from the current command mode
  help                       Describe the interactive help system
  instance-interface-type    Configure the interface types upon which
                             parameters can be instantiated
  log                        Configure logging settings
  macro                      Run a CLI macro
  no                         Negate a command or set its default(s)
  range                      Set the valid range of a QoS parameter
  run                        Run an exec mode command (alias command do)
  sleep                      Make the Command Interface pause for a specified
                             duration
  subscriber-interface-type  Configure interface types representing subscriber
                             interfaces

[Contents] [Prev] [Next] [Index] [Report an Error]