Monitoring DoS Protection Groups

Use the commands described in this section to monitor DoS protection groups.

show dos-protection-group

• Use to display DoS protection groups.
• If you do not specify a group, displays the names of the currently configured DoS protection groups.
• If you specify a group, displays information about the specified group.
• If you do not specify the brief keyword, displays a list of references (interfaces and templates) to the DoS protection group,
• When *modified* appears next to the name of the DoS protection group. the group or protocol within the group has changed from the preprogrammed value of the associated group.
• Example

  host1(config)#show dos-protection-group
  DOS Protection Groups: 
  Default (canned-group: “ default” )  *modified*  
  Uplink  (canned-group: “ link”  } 
  ATM     (canned-group: “ pppoe”  )   *modified*
  VLAN    (canned-group: “ mixed-access” )

• See show dos-protection-group.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.