[Contents] [Prev] [Next] [Index] [Report an Error]

Monitoring Collection Statistics

To view the parameters the router uses to collect statistics, use the following show bulkstats commands.

To include or exclude lines of output based on a text string that you specify, use the output filtering feature for show commands. For details, see Command-Line Interface.

show bulkstats

Use to display the bulk statistics data collection configuration.
Field descriptions
- AdminStatus—Administrative status of the bulk statistics application
- OperStatus—Operational status of the bulk statistics application, enabled or disabled
- Interface Description Setting—Method used to encode the ifDescr object: common, proprietary, industry-common
- File Format—End of the line format in bulkstats files, carriage return and line feed (CR+LF) or LF
- Current Time—Current system time used to compare with the collection stop/start time
- Intervals—Number of times the bulk statistics collector has cycled through a collection
- PrimaryXfers—Number of times the bulk statistics collector has attempted a data file transfer to a primary server
- PrimaryFails—Number of primary server transfer failures
- SecondaryXfers—Number of times the bulk statistics collector has attempted a data file transfer to a secondary server
- SecondaryFails—Number of secondary server transfer failures
- BulkStats Collector Information:
  - Index—Bulk statistics collector index number
  - CurrSize—Current size of the bulk statistics file in bytes
  - MaxSize—Maximum size configured for the bulk statistics file in bytes
  - Intrvl—Time interval between bulk collections in seconds
  - Mode—How often the collector is set up to collect statistics:
    - periodic—Collects statistics periodically
    - single-interval—Collects statistics once only
  - XferMode—Collect mode configured for the collector:
    - auto—Agent transfers file when interval expires
    - manual—Network management system or the user initiates transfers
    - onFull—Agent transfers file when it reaches the maximum size
  - State
    - inProg—Collector is properly configured and currently active
    - notInSvc—Collector has been decommissioned by a management client
    - notReady—Collector does not have enough configuration information to go active
    - error—Configuration or operational error
  - Index—Bulk statistics collector index number
  - Primary-Receiver—Index number of the primary receiver to which the system transfers data, if defined
  - Second-Receiver—Index of the secondary receiver to which the system transfers data
  - Last Transfer Failure—Last time that the collector attempted to retrieve statistics and was unsuccessful
  - Interval Start Time—Start of current interval of bulk collections. The collector began collecting bulk statistics at this time.
  - Interval Stop Time—End of current interval of bulk collections.
- Schema Information:
  - Index—Index number of the schema
  - Subtree—Type of bulk statistics schema configured on the collector: if-stack, if-stats, or system
  - CollectorIndex—Bulk statistics collector index number
  - Create-Delete Time Stats—State of final statistics collection (enabled or disabled)
  - Create-Delete Interface Type—Interface type associated with final statistics collection (ATM 1483, IP, PPP)
  - State
    - active—Schema is properly configured and currently active
    - notInSvc—Schema has been decommissioned by a management client
    - notReady—Schema does not have enough configuration information to go active
    - error—Configuration or operational error
  - Subtree List—Types of statistics the schema is configured to receive
- Interface Types:
  - Index—Index number of the interface type entry
  - Type—Interface type for which bulk statistics collection is configured
  - CollectorIndex—Index number of the collector to which the interface type applies
  - State
    - active—Interface type is properly configured and currently active
    - notInSvc—Interface type has been decommissioned by a management client
    - notReady—Interface type does not have enough configuration information to go active
    - error—Configuration or operational error
- Receiver Information:
  - Index—Index number of the receiver
  - RemoteFileName—Hostname, path, and filename of the remote FTP server
  - State
    - active—Receiver is properly configured and currently active
    - notInSvc—Receiver has been decommissioned by a management client
    - notReady—Receiver does not have enough configuration information to go active
    - error—Configuration or operational error
  - Status
    - Success
    - Copy source does not exist or is unreachable
    - Copy failed
    - File in use
- Virtual Router Groups:
  - Collector—Number that identifies the particular data collector, in the range 1–65535
  - Virtual-Routers—Set of virtual router names (up to 64 names)

Example

host1#show bulkstats

  AdminStatus:  enabled
  OperStatus:   enabled
  Interface Description Setting: industry-common
  File Format: CR+LF 
Current Time: TUE AUG 15 2002 15:54:20 UTC

  Intervals PrimaryXfers PrimaryFails SecondaryXfers SecondaryFails
  --------- ------------ ------------ -------------- --------------
  0         0            0            0              0

  BulkStats Collector Information:
  Index  CurrSize  MaxSize   Intrvl  Mode      XferMode  State
  -----  --------  --------  ------  --------- --------  -------
  1      490       3670016   600     periodic  manual    inProg
  2      0         3670016   360     periodic  manual    notReady

  Index  Primary-Receiver  Second-Receiver  Last Transfer Failure
  -----  ----------------  ---------------  --------------------
  1      1                 not defined
  2      not defined       not defined

  Index Interval Start Time          Interval Stop Time
  ----- ---------------------------- -------------------------
  1     TUE AUG 15 2000 15:52:33 UTC TUE AUG 15 2000 16:02:33 UTC
  2     Not started                  N/A

Schema Information:
  Index  Subtree
  -----  -------------------------------------------------
  1      ifStats

  Index  CollectorIndex  State
  -----  --------------  --------
  1      1               active

  Index  Create-Delete Time Stats  Create-Delete Interface Types
  -----  ------------------------  -----------------------------
  1      enabled                   IP

  Index  Subtree List
  -----  -------------------------------------------------------------
  1      all

  Interface Types:
  Index         Type             CollectorIndex  State
  -----  ----------------------  --------------  --------
  1      Ppp                     1               active
  6      Ethernet                1               active
  11     Atm1483                 1               active

  Receiver Information:
  Index  RemoteFileName
  -----  -------------------------------------------------------
  1      host:/upload/bulkStas.sts

  Index  State     Status
  -----  --------  ---------------------------------------------
  1      notReady  Copy source does not exist or is unreachable

Collector  Virtual-Routers
---------  ---------------
33             serviceProviderABC
655             default

See show bulkstats.

show bulkstats collector description

Use to display information about the collector’s file description.
Field descriptions
- Index—Index number of the bulk statistics collector
- FileDescription—Descriptive information added to the bulk statistics file with the bulkstats collector description command

Example

host1#show bulkstats collector description
  Index  FileDescription
  -----  -----------------------
  1      Bulk SNMP Statistics Collection

See show bulkstats collector description.

show bulkstats collector interval

Use to display information about the collector transfer interval configuration.
Field descriptions
- Index—Index number of the bulk statistics collector
- Interval—Amount of time, in seconds, that the collector transfers data to the receiver

Example

host1#show bulkstats collector interval
Index  Interval
-----  --------
1      360

See show bulkstats collector interval.

show bulkstats collector max-size

Use to display information about the bulk statistics maximum file size configuration.
Field descriptions
- Index—Index number of the bulk statistics collector
- MaxSize—Maximum size of the bulk statistics file in bytes

Example

host1#show bulkstats collector max-size
Index  MaxSize
-----  ------------
1      2097152

See show bulkstats collector max-size.

show bulkstats collector transfer-mode

Use to display information about the bulk statistics transfer mode configuration.
Field descriptions
- Index—Index number of the bulk statistics collector
- Transfer-Mode:
  - auto-xfer—Server automatically transfers the bulk statistics files to a remote FTP server
  - manual-xfer—Server expects the user to transfer bulk statistics files
  - on-file-full—Server transfers the bulk statistics file when the file reaches its maximum size
- Primary-Receiver—Receives the bulk statistics sent by the collector
- Secondary-Receiver—Serves as a backup to the primary receiver

Example

host1#show bulkstats collector transfer-mode
Index  Transfer-Mode  Primary-Receiver  Secondary-Receiver
-----  -------------  ----------------  ------------------
1      auto-xfer      1                 2

See show bulkstats collector transfer-mode.

show bulkstats interface-type

Use to display information about the bulk statistics interface types configuration.
Field descriptions
- Interface Types:
- Index—Index number of the interface type entry
- Type—Interface type for which bulk statistics collection is configured
- CollectorIndex—Index of the collector to which the interface type applies
- State
  - active—Interface type is properly configured and currently active
  - notInSvc—Interface type has been decommissioned by a management client
  - notReady—Interface type does not have enough configuration information to go active
  - error—Configuration/operational error

Example

host1#show bulkstats interface-type

Interface Types:
  Index         Type             Collector  State
  -----  ----------------------  ---------  --------
  1      ppp                     1          active

See show bulkstats interface-type.

show bulkstats receiver

Use to display information about the remote file configuration of the bulk statistics receiver.
Field descriptions
- Index—Index number of the receiver
- RemoteFileName—Hostname, path, and filename of the remote FTP server
- Index—Index number of the receiver
- State
  - active—Receiver is properly configured and currently active
  - notInSvc—Receiver has been decommissioned by a management client
  - notReady—Receiver does not have enough configuration information to go active
  - error—Configuration/operational error
- Status
  - Success
  - Copy source does not exist or is unreachable
  - Copy failed
  - File in use

Example

host1#show bulkstats receiver

  Index  RemoteFileName
  -----  ----------------------------------------------
  1      f:/upload/bulkStas.sts

  Index  State     Status
  -----  --------  ---------------------------------------------
  1      notReady  Copy source does not exist or is unreachable

See show bulkstats receiver.

show bulkstats statistics

Use to display bulk statistics counters.
Field descriptions
- AdminStatus—Administrative status of the bulk statistics application
- OperStatus—Operational status of the bulk statistics application
- HdwDetects—Number of times the bulk statistics application detected a line module bulkstat collector’s presence
- HdwCollectorCreates—Number of line module collectors created
- CollectorCreateReqs—Number of times the bulk statistics application requested the creation of a line module collector
- CollectorStopReqs—Number of times the bulk statistics application requested the line module collectors to stop
- CollectorDeleteReqs—Number of times the bulk statistics application requested the deletion of a line module collector
- CollectorStarts—Number of times the bulk statistics collector has started
- CollectorIncompleteCfgs—Number of times the bulk statistics collector attempted to start a collector, but failed because the collector’s configuration was incomplete
- CollectorStopFailures—Number of times the bulk statistics collector failed during a collector stop request
- DriverErrors—Number of bulk statistics driver errors
- FileSizeFulls—Number of times the bulk statistics application ran out of storage space
- CollectorFileNearlyFullTraps—Number of nearly full events posted to the SNMP agent on this router
- CollectorFileFullTraps—Number of file full events posted to the SNMP agent on this router
- Intervals—Number of times the bulk statistics collector has cycled through a collection
- PrimaryXfers—Number of times the bulk statistics collector has attempted a data file transfer to a primary server
- PrimaryFails—Number of primary server transfer failures
- SecondaryXfers—Number of times the bulk statistics collector has attempted a data file transfer to a secondary server
- SecondaryFails—Number of secondary server transfer failures
- BulkStats Collector Statistics:
  - Index—Bulk statistics collector index
  - CurrSize—Current size of the bulk statistics storage file in bytes
  - CreateErrs—Number of bulk statistics collector create errors
  - Last Transfer Failure—Last time that the collector attempted to retrieve statistics and was unsuccessful
  - Interval Start Time—Start of current interval or bulk collections. The collector began collecting bulk statistics at this time.
  - Interval Stop Time—End of current interval of bulk collections
- Dynamic Interface Collector statistics:
  - Collector Index—Bulk statistics collector index
  - Slot#—Slot number from which the statistics were obtained
  - Received—Number of records for dynamic interfaces that were reported by the specified interface
  - Transferred—Number of record for dynamic interface that were written to the bulk statistics (.sts) file.
  - Dropped—Number of records for dynamic interfaces that were dropped (that is, not written to the bulk statistics [.sts] file)

Example

host1#show bulkstats statistics

AdminStatus:                  enabled
OperStatus:                   enabled
HdwDetects:                   4
HdwCollectorCreates:          8
CollectorCreateReqs:          2
CollectorStopReqs:            0
CollectorDeleteReqs:          0
CollectorStarts:              25
CollectorIncompleteCfgs:      3
CollectorStopFailures:        0
DriverErrors:                 0
FileSizeFulls:                0
CollectorFileNearlyFullTraps: 0
CollectorFileFullTraps:       0

  Intervals PrimaryXfers PrimaryFails SecondaryXfers  SecondaryFails
  --------- ------------ ------------ --------------  --------------
  24         18            5             0               0

  BulkStats Collector Statistics:
  Index  CurrSize  CreateErrs  Last Transfer Failure
  -----  --------  ----------  ----------------------------
  1      331       0           MON JAN 24 2001 17:21:33 UTC
  2      0         0

  Index Interval Start Time          Interval Stop Time
  ----- ---------------------------- -------------------------
  1     MON JAN 24 2001 19:09:33 UTC MON JAN 24 2001 19:15:33 UTC
  2     Not started                  N/A

Dynamic Interface Collector statistics:
  CollectorIndex  Slot#  Received    Transferred  Dropped
  --------------  -----  ----------  -----------  ----------
  1               1      0           0            0

See show bulkstats statistics.

show bulkstats traps

Use to display information about the bulk statistics traps configured to collect statistics.
Field descriptions
- Trap Type
  - nearly-full—Trap will be posted to the SNMP entity on this system when the threshold is reached
  - file-full—Trap will be posted to the SNMP entity on this system when the trap reaches 100%
- State—Configuration setting: enabled, disabled
- Threshold—Nearly full trap will be posted to the SNMP entity on this system when this percentage is reached
- Traps Sent—Number of times this event was posted to the SNMP entity on this system

Example

host1#show bulkstats traps
Trap Type    State   Threshold    Traps Sent
-----------  -------  ----------  ----------
file-full    enabled  N/A         0
nearly-full  enabled  5           0

See show bulkstats traps.

show bulkstats virtual-routers

Use to display information about the bulk virtual router group configuration.
Field descriptions
- Collector—Number that identifies the particular data collector, in the range 1–65535
- Virtual-Routers—Set of virtual router names (up to 64 names)

Example

host1#show bulkstats virtual-routers

Collector  Virtual-Routers
---------  ---------------
33             serviceProviderABC
655             default

See show bulkstats virtual-routers.

[Contents] [Prev] [Next] [Index] [Report an Error]