Monitoring Bandwidth Oversubscription

Use the show bandwidth oversubscription and show utilization (see Monitoring Modules) commands to monitor the status of bandwidth oversubscription.

show bandwidth oversubscription

• Use to display the bandwidth oversubscription status for an ERX-7xx model or ERX-1410 router.
• Example 1: This example shows the display when bandwidth oversubscription is enabled.

  host1#show bandwidth oversubscription
  Bandwidth oversubscription is currently in effect.

• Example 2: This example shows the display that appears after you issue the no bandwidth oversubscription command to disable bandwidth oversubscription.

  host1#no bandwidth oversubscription
  host1#show bandwidth oversubscription
  Bandwidth oversubscription is currently in effect.
  Bandwidth oversubscription will not be in effect the next time the system reboots.

• Example 3: This example shows the display when bandwidth oversubscription is disabled.

  host1#show bandwidth oversubscription
  Bandwidth oversubscription is currently not in effect.

• Example 4: This example shows the display that appears after you issue the bandwidth oversubscription command to enable bandwidth oversubscription.

  host1#bandwidth oversubscription
  host1#show bandwidth oversubscription
  Bandwidth oversubscription is currently not in effect.
  Bandwidth oversubscription will be in effect the next time the system reboots.

• See show bandwidth oversubscription.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.