[Contents] [Prev] [Next] [Index] [Report an Error]

Local IPSec Transport Profile Configuration

In this mode, you can configure preshared IKE keys for IPSec transport profiles.

From the IPSec Transport Profile Configuration mode, type local ip address and the ipAddress, and press Enter.

host1(config-ipsec-transport-profile)#local ip address 10.10.1.1
host1(config-ipsec-transport-profile-local)#?  
  default           Set a command to its default(s)
  do                Run an exec mode command (alias command run)
  exit              Exit from the current command mode
  help              Describe the interactive help system
  log               Configure logging settings
  macro             Run a CLI macro
  no                Negate a command or set its default(s)
  pre-share         Specify pre-shared group key based on local ip address
  pre-share-masked  A pre-encrypted key, generated by show config rather than
                    interactive
  run               Run an exec mode command (alias command do)
  sleep             Make the Command Interface pause for a specified duration

[Contents] [Prev] [Next] [Index] [Report an Error]