List of Figures

Figure 1: Private Line Aggregation with the E-series Router

Figure 2: B-RAS Application

Figure 3: Network Configuration Using a Bottom-Up Approach

Figure 4: E-series Router Support for Fractional T1/E1 Through T3/E3 Interfaces

Figure 5: Channelized T3 Interface Configuration Parameters

Figure 6: T3 Interface Configuration Parameters

Figure 7: SONET Interfaces

Figure 8: Parameters for T1 over DS3 Interface Configuration

Figure 9: Frame Relay Interface Design

Figure 10: Structure of Frame Relay Protocols

Figure 11: Serial Interface Configuration Parameters for a Frame Relay Connection

Figure 12: E-series Router IP/ATM Access Connection

Figure 13: Structure of the ATM Interface Design

Figure 14: Structure of ATM Protocol

Figure 15: ATM Interface Configuration Parameters

Figure 16: IP/PPP Connections from the CPE on an E-series Router

Figure 17: Structure of PPP

Figure 18: PPP Interface Configuration Parameters

Figure 19: Structure of Cisco HDLC Protocol

s

Figure 21: Command Mode Architecture

Figure 22: Transferring System Files to the E-series Router

Figure 23: FTP Configuration Example

Figure 24: DNS Hierarchy Example

Figure 25: SRP Module on ERX-7xx Models and ERX-14xx Models

Figure 26: SRP Module on the E120 Router and the E320 Router

Figure 27: High Availability States

Figure 28: Location of the Software Reset Button

Figure 29: Typical Control Packet Processing

Figure 30: Example of an NTP Hierarchy

Figure 31: Virtual Routers

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.