[Contents] [Prev] [Next] [Index] [Report an Error]

Line Modules Bandwidth and Switch Usage

The SRP-5G+ and SRP-10G modules comprise two switches; each switch provides 50 percent of the bandwidth.

The line modules in a slot group cannot operate at line rate if:

The sum of their bandwidths exceeds the bandwidth that the SRP module can supply per slot group.
The sum of the bandwidths they require from one SRP switch exceeds the bandwidth that the SRP switch can supply per slot group.

Table 39 shows the bandwidth that each line module requires for line rate performance and the switches that the line module can use on the SRP-5G+ and SRP-10G modules.

Table 39: Bandwidth Statistics for Line Modules

Line Module	Total Bandwidth Required (Gbps)	Switches Used on SRP-5G+ and SRP-10G Modules

cOCx/STMx	2.46	Both switches
COCX-F3	2.46	Both switches


CT3/T3-F0	2.46	Both switches

GE/FE	2.46	Both switches

IPSec Service	2.46	Both switches
OC3/STM1 GE/FE	2.46	Both switches
OCx/STMx ATM	1.22	Both switches
OCx/STMx POS	2.46	Both switches

[Contents] [Prev] [Next] [Index] [Report an Error]