[Contents] [Prev] [Next] [Index] [Report an Error]

L2TP Destination Profile Host Configuration Mode

In this mode, you can set and modify L2TP host profile attributes, such as the proxy Link Control Protocol (LCP), the local hostname, the local IP address, or the interface profile.

From Global Configuration mode, enter L2TP Destination Profile mode (see above), and type remote host and a hostName, and press Enter.

host1(config-l2tp-dest-profile)#remote host george
host1(config-l2tp-dest-profile-host)#?
  default  Set a command to its default(s)
  disable  Disable L2TP parameter for remote host
  do       Run an exec mode command (alias command run)
  enable   Enable L2TP parameter for remote host
  exit     Exit from the current command mode
  help     Describe the interactive help system
  local    Configure L2TP local parameters for remote host
  log      Configure logging settings
  macro    Run a CLI macro
  no       Negate a command or set its default(s)
  profile  Assign a profile for remote host
  run      Run an exec mode command (alias command do)
  sleep    Make the Command Interface pause for a specified duration
  tunnel   Configure L2TP tunnel parameters for remote host

[Contents] [Prev] [Next] [Index] [Report an Error]