[Contents] [Prev] [Next] [Index] [Report an Error]

IPSec Tunnel Profile Configuration Mode

In this mode, you can configure a profile of an IPSec tunnel.

From Global Configuration mode, type ipsec tunnel profile and the profileName, and press Enter.

host1(config)#ipsec tunnel profile profile1
host1(config-ipsec-tunnel-profile)#?
  default                  Set a command to its default(s)
  do                       Run an exec mode command (alias command run)
  domain-suffix            Configure a domain suffix to be appended to users on
                           this profile
  exit                     Exit from the current command mode
  extended-authentication  Configure extended authentication parameters
  help                     Describe the interactive help system
  ike                      Configure IKE characteristics
  ip                       Configure local IP characteristics
  lifetime                 Configure the phase 2 life parameters
  local                    Configure local characteristics
  log                      Configure logging settings
  macro                    Run a CLI macro
  max-interfaces           Configure the maximum allowed dynamic interface
                           instantiations
  no                       Negate a command or set its default(s)
  peer                     Configure peer characteristics
  pfs                      Configure the phase 2 perfect forward secrecy
  run                      Run an exec mode command (alias command do)
  sleep                    Make the Command Interface pause for a specified
                           duration
  transform                Configure the phase 2 transforms allowed on this
                           IPSEC tunnel profile
  tunnel                   Configure tunnel parameters

[Contents] [Prev] [Next] [Index] [Report an Error]