[Contents] [Prev] [Next] [Index] [Report an Error]

IP PIM Data MDT Configuration Mode

In this mode, you can specify parameters for data MDTs.

From Global Configuration mode, type ip pim data-mdt, and press Enter:

host1:pe1:pe13(config)#ip pim data-mdt
host1:western:eastern(config-ip-pim-data-mdt)#?
  default           Set a command to its default(s)
  do                Run an exec mode command (alias command run)
  exit              Exit from the current command mode
  help              Describe the interactive help system
  log               Configure logging settings
  macro             Run a CLI macro
  mdt-data-delay    Configure MDT_DATA_DELAY timeout
  mdt-data-holdown  Configure MDT_DATA_HOLDOWN timeout
  mdt-data-timeout  Configure MDT_DATA_TIMEOUT
  mdt-interval      Configure MDT_INTERVAL timer
  no                Negate a command or set its default(s)
  route-map         Configure route-map
  run               Run an exec mode command (alias command do)
  sleep             Make the Command Interface pause for a specified duration
  tunnel            Configure tunnel parameters

[Contents] [Prev] [Next] [Index] [Report an Error]