Initializing State

After the SRP module transitions into the initializing state, bulk synchronization of the memory and NVS occurs. This includes the following:

File synchronization of the primary NVS with the standby NVS
Mirroring of appropriate state and dynamic configuration information from the active SRP (memory) to the standby SRP (memory)

Note: Depending on the size of the configuration, this process can take several minutes.

During the initializing state:

If an unsupported application is configured during initialization, the system completes initializing and enters the pending state.
If any other criterion becomes false (or is no longer met), the system enters the disabled state.
If a switchover occurs while the system is in this state, the system cold-restarts.

Once initialization is completed, the system enters the active state.