[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Enabling Warm Restart Diagnostics
Use the diag command
to enable warm restart diagnostics on a module.
diag
- Use to restart the specified SRP module or line module
and enable the system to perform diagnostic tests on the module.
- Use the force keyword to enable
the system to manually confirm conflicting conditions when the slot
of the active SRP module is specified.
- If you specify a slot on the E120 router and the E320
router that contains an SRP module, you can use the subsystem variable to perform diagnostic tests on a subsystem on the SRP module.
We recommend that you perform diagnostic tests on one subsystem at
a time to avoid interrupting network traffic transmitting through
the fabric modules.
- Use the srp keyword to perform
diagnostic tests on the SC subsystem that resides on a specified SRP
module.
- Use the fabric keyword to run
diagnostic tests on the fabric slice that resides on the specified
SRP module.
- Example 1—Enables warm restart diagnostics on a
line module
- host1#diag 3 force
- Example 2—Enables warm restart diagnostics on the
fabric subsystem of an active SRP module on the E320 router
- host1#diag 6 fabric
- There is no no version.
- See diag.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
