[Contents] [Prev] [Next] [Index] [Report an Error]

Domain Map Configuration Mode

In this mode, you can map a user domain name to a virtual router and loopback interface.

From Global Configuration mode, type the aaa domain-map command and the domain name value as found in the client’s login name. Then press Enter.

host1(config)#aaa domain-map charlie76
host1(config-domain-map)#?
  address-pool-name  Configure the address-pool-name for the domain name
  atm                Configure ATM parameters
  default            Set a command to its default(s)
  do                  Run an exec mode command (alias command run)
  exit               Exit from the current command mode
  help               Describe the interactive help system
  ip-hint            Configure the IP hint feature for the domain
  local-interface    Configure the local interface value for remote clients
  log                Configure logging settings
  loopback           Configure the loopback interface to use when RX has an
                     unnumbered interface to the PPP client
  macro              Run a CLI macro
  no                 Negate a command or set its default(s)
  override-user      Configure the username and password values to use instead
                     of the values from the remote client
  padn               Configure pppoe active discovery network parameters for
                     the domain name
  router-name        Configure the virtual-router for the domain name
  run                Run an exec mode command (alias command do)
  sleep              Make the Command Interface pause for a specified duration
  strip-domain       Configure the domain name stripping feature for the domain
  tunnel             Configure tunnel tag
  virtual-router     Configure the virtual-router for the domain name

[Contents] [Prev] [Next] [Index] [Report an Error]