Disabling Autosynchronization

If autosynchronization is enabled while you are copying long scripts or installing new software releases, it detects a disparity between the modules during the middle of the process. This feature causes significant unnecessary synchronization, resulting in prolonged copy times.

If you have installed a redundant SRP module, perform the following steps before copying long scripts:

1. Turn off autosynchronization with the disable-autosync command.
2. Perform the installation or copy the script.
3. Reenable autosynchronization with the no disable-autosync command.
4. Manually synchronize the modules with the synchronize command.

Refer to the commands and guidelines in the previous section and in the sections that follow.

disable-autosync

• Use to turn off automatic synchronization between the primary and redundant SRP modules.
• Example

  host1(config)#disable-autosync

• Use the no version to revert to the default situation, in which automatic synchronization runs as a background process every 5 minutes.
• See disable-autosync.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.