Configuration Tasks

FTP is disabled by default. You must enable the FTP server with the ftp-server enable command before the system allows FTP clients to connect.

ftp-server enable

• Use to enable the FTP server and to monitor the FTP port for attempts to connect to the FTP server.
• You can enable the FTP server on the default virtual router only.
• Example

  host1(config)#ftp-server enable

• Use the no version to terminate current FTP sessions and to disable the FTP server.
• See ftp-server enable.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.