[Contents] [Prev] [Next] [Index] [Report an Error]

Color Mark Profile Configuration Mode

In this mode, you can configure translation for a color to a type-dependent mark for TOS or EXP for an IP, IPv6 or MPLS interface.

From Rate Limit Profile Configuration mode, type the color-mark-profile command and specify a profileName, and then press Enter.

host1(config-rate-limit-profile)# mpls   color-mark-profile myprofile
host1(config-color-mark-profile)#?
  default      Set a command to its default(s)
  do           Run an exec mode command (alias command run)
  exit         Exit from the current command mode
  green-mark   Apply TOS mark to IP packets classified Green by the rate limit
               hierarchy
  help         Describe the interactive help system
  log          Configure logging settings
  macro        Run a CLI macro
  mask-value   Mask for all TOS values applied by the color-mark profile
  no           Negate a command or set its default(s)
  red-mark     Apply TOS mark to IP packets classified Red by the rate limit
               hierarchy
  run          Run an exec mode command (alias command do)
  sleep        Make the Command Interface pause for a specified duration
  yellow-mark  Apply TOS mark to IP packets classified Yellow by the rate limit
               hierarchy

[Contents] [Prev] [Next] [Index] [Report an Error]