[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Choosing a Combination of Line Modules
For line rate performance, the total bandwidth
required by the line modules in the slot group must not exceed the
bandwidth available from the SRP module. In this case, the combination
of line modules that can reside in a slot group depends on the following:
- The number of slots per group
- The bandwidth available from the SRP module
- The bandwidth required by each line module
- In the case of the SRP-5G+ and SRP-10G modules, the switches
(upper and lower) that the line module can use.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
