[Contents] [Prev] [Next] [Index] [Report an Error]

Before You Configure NTP

Before you configure NTP, complete the following procedures:

  1. Configure at least one IP address on the router.
  2. Check that the system clock reads the correct time to within 15 minutes, and that the time zone and summer time settings are correct.
  3. Reset the system clock manually if the time, time zone, or summer time settings are incorrect.
  4. If you want to configure the NTP system as an NTP client, choose the NTP servers.
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.