[Contents] [Prev] [Next] [Index] [Report an Error]

ATM VC Class Configuration Mode

In this mode, you can configure a class of attributes for an ATM data PVC. The VC class can include attributes for the service category, encapsulation method, F5 OAM options, and Inverse ARP. You then apply the set of attributes as a group by assigning the VC class to an individual PVC, to all PVCs created on a specified ATM major interface, to all PVCs created on a specified ATM 1483 subinterface, or to a base profile from which bulk-configured VC ranges are dynamically created.

From Global Configuration mode, type the vc-class atm command followed by an alphanumeric VC class name of up to 32 characters, and press Enter.

host1(config)#vc-class atm premium-subscriber-class
host1(config-vc-class)#?
  cbr            Configure the Constant Bit Rate (CBR) service class
  default        Set a command to its default(s)
  do             Run an exec mode command (alias command run)
  encapsulation  Configure the ATM encapsulation
  exit           Exit from the current command mode
  help           Describe the interactive help system
  inarp          Configure the Inverse Address Resolution Protocol (InARP)
                 protocol
  log            Configure logging settings
  macro          Run a CLI macro
  no             Negate a command or set its default(s)
  oam            Configure Operations, Administration, and Management (OAM)
  oam-pvc        Configure Operations, Administration, and Management (OAM) for
                 Permanent Virtual Circuit (PVC)
  run            Run an exec mode command (alias command do)
  sleep          Make the Command Interface pause for a specified duration
  ubr            Configure the Unspecified Bit Rate (UBR) service class
  vbr-nrt        Configure the Variable Bit Rate Non-Real Time (VBR-nrt)
                 service class
  vbr-rt         Configure the Variable Bit Rate Real Time (VBR-rt) service
                 class

[Contents] [Prev] [Next] [Index] [Report an Error]