Disabling and Removing DVMRP

You can disable DVMRP on a VR or an interface without removing the configuration. You can also remove DVMRP from a VR or an interface.

disable

• Use to disable DVMRP processing on a VR without removing the DVMRP configuration. By default, DVMRP processing is enabled.
• Example

  host1:boston(config-router)#disable

• Use the no version to reenable DVMRP processing on a VR.
• See disable.

ip dvmrp

• Use to activate DVMRP on an interface.
• This command automatically creates and enables DVMRP processing on the current VR.
• Issue this command to identify this interface as one that DVMRP owns.
• Example

  host1:boston(config-if)#ip dvmrp

• Use the no version to remove DVMRP from an interface.
• See ip dvmrp.

ip dvmrp disable

• Use to disable DVMRP processing on an interface without removing the DVMRP configuration.
• Example

  host1:boston(config-if)#ip dvmrp disable

• Use the no version to reenable DVMRP processing on an interface.
• See ip dvmrp disable.

router dvmrp

• Use to create and enable DVMRP processing on a VR or to access Router Configuration mode.
• Example

  host1:boston(config)#router dvmrp

• Use the no version to remove DVMRP from a VR.
• See router dvmrp.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.