VLAN Base Profiles

To configure a dynamic VLAN subinterface over a static VLAN major interface, you must create a base profile. The base profile includes one or more of the following attributes for the VLAN subinterface:

• advisory-rx-speed—Sets an advisory receive speed for VLAN subinterfaces that are created with this profile. For information, see vlan advisory-rx-speed.
• advisory-tx-speed—Sets an advisory connect speed for VLAN subinterfaces that are created with this profile. For information, see vlan advisory-tx-speed.
• auto-configure—Specifies the types of upper-interface encapsulations that are accepted or detected by the dynamic VLAN subinterface. For information, see vlan auto-configure.
• auto-configure agent-circuit-identifier—Enables the creation of VLAN subinterfaces that are based on agent-circuit-identifier information. For information, see vlan auto-configure agent-circuit-identifier.
• description—Assigns a description to VLAN subinterfaces that are created with this profile. For information, see vlan description.
• policy—Assigns a policy to a VLAN. For information, see vlan policy.
• profile—Adds a nested profile assignment, which references another profile that dynamically configures an upper-interface encapsulation type over the VLAN subinterface. For information, see vlan profile.
• service-profile—Specifies a service profile name for a VLAN. For information, see vlan service-profile.
• svlan ethertype—Specifies that the packet must use this Ethertype to create the dynamic VLAN subinterface. For more information, see svlan ethertype.

You can override the base profile assignment for a VLAN or S-VLAN that exists with a profile. For more information, see Overriding Base Profile Assignments.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.