You can configure one or more protocols over Ethernet with or without VLANs. This section focuses on non-VLAN configurations only. You can configure the following upper-layer protocols on Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces:
The Ethernet configuration examples in this section use combinations of these protocols. Figure 8 illustrates how different protocols can be multiplexed over a single physical link without the use of VLANs.
Figure 8: Multiplexing Multiple Protocols over a Single Physical Link
The following sections describe how to create the following common non-VLAN configurations, which you can configure on Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces:
 |
Note: You can also configure upper-layer protocols over dynamic interfaces. See Configuring Dynamic Interfaces and Configuring Dynamic Interfaces Using Bulk Configuration. |
 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |