[Contents] [Prev] [Next] [Index] [Report an Error]

Upper-Layer Dynamic Interface Configurations

E-series routers support the following types of upper-layer dynamic interface configurations:

Internet Protocol version 4 (IPv4) is supported for all of these upper-layer dynamic interface configurations.

Currently, Internet Protocol version 6 (IPv6) is supported only when PPP or MLPPP is the layer immediately below the IPv6 layer in the interface column. Dynamic IPv6 is not supported directly over static ATM 1483, dynamic bridged Ethernet, or dynamic VLANs. Upper-layer dynamic interface columns that support IPv6 include the following:

For more information about IPv4, see chapter Configuring IP in JUNOSe IP, IPv6, and IGP Configuration Guide. For more information about IPv6, see chapter Configuring IPv6 in JUNOSe IP, IPv6, and IGP Configuration Guide.


[Contents] [Prev] [Next] [Index] [Report an Error]