Setting Statistics Baselines

You can set a statistics baseline for ATM interfaces, ATM virtual circuits, and ATM virtual paths configured on the router.

baseline atm vp interface

Use to set a statistics baseline for an ATM virtual path (VP) interface.
The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
To set the baseline for an ATM VP, specify the VPI. The numeric range of the VPI depends on the line module capabilities and current configuration.
To display baseline statistics, use the delta keyword with ATM show commands.
Exampleshost1#baseline atm vp interface atm 12/0 0 host1#baseline atm vp interface atm 5/0/0 1
There is no no version.
See baseline atm vp interface.

baseline interface atm

Use to set a statistics baseline for ATM interfaces or a specific virtual circuit.
The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
To set the baseline for a circuit, specify a VCD in the range 1–2147483647.
To set the baseline on an interface, omit the VCD.
To display baseline statistics, use the delta keyword with ATM show commands.
Exampleshost1#baseline interface atm 9/1 123 host1#baseline interface atm 5/0/0 123
There is no no version.
See baseline interface.