[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
PPPoE Remote Circuit ID
Capture
When you enable capture of the PPPoE remote circuit
ID by issuing the pppoe remote-circuit-id command, the E-series router captures the remote circuit ID value
if it is sent from the DSLAM. The PPPoE intermediate agent on the
DSLAM appends a vendor-specific tag containing the remote circuit
ID to the existing PPPoE PADI or PADR packet and sends this packet
to the E-series router. The PPPoE remote circuit ID value can be a
maximum of 64 characters.
The router stores this value on the line module on which the PPPoE
interface is configured.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
