Monitoring Transparent Bridging

This section describes how to:

• Set a statistics baseline for bridge groups and bridge interfaces.
• Remove all dynamic MAC address entries or a specific dynamic MAC address entry from the forwarding table for bridge groups and bridge interfaces.
• Use the show commands to monitor bridge groups, bridge group interfaces, and subscriber policies

  Note: The E120 router and E320 router output for monitor and show commands is identical to output from other E-series routers, except that the E120 and E320 router output also includes information about the adapter identifier in the interface specifier (slot/adapter/port).

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.