Monitoring Subscriber Policies

You can use the show subscriber-policy command to display the rules for all subscriber policies configured on your router or for a specified subscriber policy.

show subscriber-policy

• Use to display the set of forwarding and filtering rules for all default and nondefault subscriber policies configured on the router or for a specified subscriber policy.
• For all packet types except Relearn, the command displays permit to indicate that the bridge interface forwards the packets, or deny to indicate that the bridge interface filters the packets. (For information about the meaning of permit and deny for Relearn, see the field descriptions.)
• Field descriptions
  • Subscriber—Name of the subscriber policy
  • ARP—Specifies how the bridge interface handles ARP packets
  • Broadcast—Specifies how the bridge interface handles broadcast packets
  • Multicast—Specifies how the bridge interface handles multicast packets
  • Unknown Destination—Specifies how the bridge interface handles packets with unknown unicast DAs
  • Unicast—Specifies how the bridge interface handles unicast (user-to-user) packets
  • PPPoE—Specifies how the bridge interface handles PPPoE packets
  • Relearn—Specifies whether the bridge interface can relearn a MAC address entry on a different interface from the one initially associated with this entry in the forwarding table; permit indicates that relearning is allowed, and deny indicates that relearning is prohibited
  • Mpls—Specifies how the bridge interface handles MPLS packets
• Example 1—Displays the rules for all default and nondefault subscriber policies currently configured on the router

  host1#show subscriber-policy
    Subscriber: default Subscriber
    ARP                 : Permit
    Broadcast           : Deny
    Multicast           : Permit
    Unknown Destination : Deny
    IP                  : Permit
    Unknown Protocol    : Permit
    Unicast             : Permit
    PPPoE               : Permit
    Relearn             : Permit
    Mpls                : Permit
    Subscriber: default Trunk
    ARP                 : Permit
    Broadcast           : Permit
    Multicast           : Permit
    Unknown Destination : Permit
    IP                  : Permit
    Unknown Protocol    : Permit
    Unicast             : Permit
    PPPoE               : Permit
    Relearn             : Permit
    Mpls                : Permit

    Subscriber: client01
    ARP                 : Permit
    Broadcast           : Permit
    Multicast           : Deny
    Unknown Destination : Deny
    IP                  : Permit
    Unknown Protocol    : Permit
    Unicast             : Permit
    PPPoE               : Permit
    Relearn             : Deny
    Mpls                : Permit

• Example 2—Displays the rules for a specified subscriber policy

  host1#show subscriber-policy client01
    Subscriber: client01
    ARP                 : Permit
    Broadcast           : Permit
    Multicast           : Deny
    Unknown Destination : Deny
    IP                  : Permit
    Unknown Protocol    : Permit
    Unicast             : Permit
    PPPoE               : Permit
    Relearn             : Deny
    Mpls                : Permit

• See show subscriber-policy.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.