List of Figures

Figure 1: ATM Interface Column

Figure 2: NBMA Interface Stack

Figure 3: Configuring an ATM Interface, Subinterface, and PVC

Figure 4: Interconnection and Relationship of NNIs and Subnetworks

Figure 5: MLFR Aggregation of T1 Lines into a Single Bundle

Figure 6: Terminating the Bundle at an MLFR Bridge

Figure 7: Structure of MLFR

Figure 8: Multiplexing Multiple Protocols over a Single Physical Link

Figure 9: Example of IP over Ethernet Stacking Configuration Procedure

Figure 10: Example of PPPoE Stacking Configuration Procedure

Figure 11: Example of IP and MPLS Stacking Configuration Procedure

Figure 12: Example of IP, MPLS, and PPPoE Stacking Configuration Procedure

Figure 13: Use of VLANs to Multiplex Different Protocols over a Single Physical Link

Figure 14: Example of IP/VLAN/Fast Ethernet Stacking Configuration Procedure

Figure 15: Example of PPPoE/VLAN/Fast Ethernet Stacking Configuration Procedure

Figure 16: Example of MPLS/VLAN/Fast Ethernet Stacking Configuration Procedure

Figure 17: Example of PPPoE over VLAN with IP over VLAN Stacking Configuration Procedure

Figure 18: Example of PPPoE over S-VLAN Stacking Configuration Procedure

Figure 19: S-VLAN Tunnels for Ethernet Layer 2 Services over MPLS

Figure 20: Interface Stack for 802.3ad Link Aggregation

Figure 21: Ethernet Link Redundancy Configuration Models

Figure 22: GE-2 Line Module Using Physical Port Redundancy

Figure 23: Single-Homed GE-2 Line Module Configuration

Figure 24: Single-Homed FE-8 Line Module Configuration (1:N)

Figure 25: FE-8 Line Module with 4 Redundant Ethernet Links (1:1)

Figure 26: Single-Homed GE-4 IOA Configuration (1:4)

Figure 27: GE-8 IOA Configuration Across IOAs (1:N)

Figure 28: Dual-Homed Configuration (1:1)

Figure 29: Dual-Homed Heterogeneous Configuration in an RSTP Network

Figure 30: Authentication with EAP

Figure 31: MLPPP Aggregation of T1 Lines into a Single Bundle

Figure 32: Structure of MLPPP

Figure 33: PPPoE over ATM

Figure 34: Example of PPPoE over ATM Stacking

Figure 35: Example of PPPoE Stacking

Figure 36: Bridged Ethernet Topology, Router Terminating and Routing Traffic

Figure 37: Interface Stacking for VLANs over Bridged Ethernet

Figure 38: Bridge Group with Fast Ethernet and Gigabit Ethernet Bridge Interfaces

Figure 39: Configuring an ATM 1483 Interface to Support Dynamic Interfaces

Figure 40: Dynamic PPP Interface Columns

Figure 41: Dynamic PPPoE Interface Columns

Figure 42: Dynamic PPPoE over Static PPPoE with ATM Interface Columns

Figure 43: Dynamic PPPoE over Static PPPoE with Non-VLAN Interface Columns

Figure 44: Dynamic PPPoE over Static PPPoE with VLAN Interface Columns

Figure 45: Dynamic PPPoE over Static PPPoE with S-VLAN Interface Columns

Figure 46: Dynamic IPoA over Static ATM 1483 Interface Columns

Figure 47: Dynamic Bridged Ethernet over Static ATM 1483 Interface Columns

Figure 48: Creating and Configuring a Profile

Figure 49: Assigning a Profile to a Static Interface

Figure 50: Dynamic Interface Columns over Dynamic ATM 1483 Subinterfaces

Figure 51: Dynamic Interface Columns over Dynamic VLAN Subinterfaces

Figure 52: Dynamic IP and PPPoE over Single Dynamic VLAN Subinterface

Figure 53: Dynamic VLAN Subinterfaces for Subscribers

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.