 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
When you configure Ethernet layer 2 services over MPLS using S-VLAN tunnels, the only interface that you can stack over an S-VLAN tunnel is an MPLS tunnel, which you configure using the MPLS tunneling command (mpls-relay or route interface) that is appropriate for your configuration. Attempting to configure any other interface type—such as IP, MPLS (nontunnel), or PPPoE—over the S-VLAN tunnel causes the router to generate an error and reject the configuration as invalid.
For details about configuring MPLS and layer 2 services over MPLS, see:
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |