Creating Bridge Groups

To create a bridge group:

1. From Global Configuration mode, create a bridge group and give it an alphanumeric name.

   host1(config)#bridge westford01

   Note: Do not assign the bridge group the same name as an existing VR configured on your router.

2. (Optional) Repeat Step 1 to create additional bridge groups, one at a time.

   host1(config)#bridge westford02

   host1(config)#bridge westford03

3. (Optional) Use the appropriate show command to verify the bridge group creation.

   host1#show bridge groups

bridge

• Use to create a bridge group for transparent bridging.
• You must specify an alphanumeric name for the bridge group; the name can be a maximum of 32 characters and can use any combination of alphanumeric characters.
• Example

  host1(config)#bridge westford04

• Use the no version to remove the bridge group from the router.
• See bridge.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.