[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Static VLAN Subinterfaces Within VLAN Subranges

You can do either of the following on an E-series router:

Create a static VLAN subinterface within an existing bulk-configured VLAN subrange
Create a bulk-configured VLAN subrange that includes an existing static VLAN subinterface

The following sections describe how to perform these tasks.

The example procedures in this section show how to configure static VLAN subinterfaces within VLAN subranges by using the same loopback interface referenced by multiple unnumbered IP interfaces. Instead of assigning a different IP address to each physical interface, the first example assigns an IP address to a loopback interface (loopback 0). Each physical interface is then configured as an unnumbered IP interface, referencing the same loopback interface.

[Contents] [Prev] [Next] [Index] [Report an Error]