Configuring IP and MPLS over a Static Ethernet Interface

To configure both IP and MPLS over an Ethernet interface:

1. Specify a Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet port.

   host1(config)#interface fastEthernet 4/0

2. Create an IP interface.

   host1(config-if)#ip address 192.5.127.8 255.255.255.0

3. Create an MPLS interface.

   host1(config-if)#mpls

Figure 11 illustrates this configuration.

Figure 11: Example of IP and MPLS Stacking Configuration Procedure

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.