ATM 1483 Base Profiles

To configure a dynamic ATM 1483 subinterface over a static ATM AAL5 interface, you must create a base profile. The base profile includes one or more of the following attributes for the ATM 1483 subinterface, listed alphabetically:

• advisory-rx-speed—Sets an advisory receive speed for ATM 1483 subinterfaces that are created with this base profile. For information, see atm atm1483 advisory-rx-speed.
• atm pvc—Applies encapsulation, traffic-shaping, and OAM parameters to the range of ATM PVCs configured on the ATM AAL5 interface for use by the dynamic ATM 1483 subinterface. For information, see atm pvc.
• auto-configure—Specifies the types of upper-interface encapsulations that are accepted or detected by the dynamic ATM 1483 subinterface. For information, see atm atm1483 auto-configure.
• atm class-vc—Specifies the VC class assigned to the bulk-configured VC ranges created on the dynamic ATM 1483 subinterfaces associated with this base profile. For information, see atm class-vc.
• description—Assigns a description to ATM 1483 subinterfaces that are created with this base profile. For information, see atm atm1483 description. You can then set up the router to send this description to AAA by using the atm atm1483 export-subinterface-description command, as described in Sending Interface Descriptions to AAA in Configuring ATM .
• profile—Adds a nested profile assignment, which references another profile that dynamically configures an upper-interface encapsulation type over the ATM 1483 subinterface. For information, see atm atm1483 profile.
• subscriber—Configures a local subscriber for a dynamic upper-interface encapsulation type. For information, see atm atm1483 subscriber.

You can override the base profile assignment for a single ATM PVC that exists within a bulk-configured VC subrange with a profile that includes debugging attributes. This feature is useful for troubleshooting problems with the ATM 1483 dynamic subinterface columns created on the specified PVC. For more information, see Overriding Base Profile Assignments.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.