[Contents] [Prev] [Next] [Index] [Report an Error]

After CC Cell Flow Is Enabled

If the VC or VP is set up as the source point, the ATM interface sends one CC cell per second. CC cell generation stops if one of the following conditions occur:

The ATM interface goes down.
You disable OAM CC on the circuit by using the atm pvc command.
The peer deactivates the OAM CC cell flow.
You disable OAM cell reception and transmission on the ATM interface by using the atm oam flush command.

If the VP is set up as a CC sink point and no CC cell is received for 4 seconds, the VP goes to AIS state and sends one RDI cell per second.

To view the current state of the activation or deactivation process, including statistics, use the show atm oam command for VPs and the show atm vc atm interface command for VCs.

[Contents] [Prev] [Next] [Index] [Report an Error]