Specifying Flow Export

Use the ip flow-export command to specify the location to which you want to export the J-Flow datagrams.

ip flow-export

Use to specify the location to which you want to export J-Flow datagrams or specify an alternate source address for outbound export J-Flow datagrams.
Example 1-Specifies the destination address for J-Flow datagramshost1(config)#ip flow-export 192.168.2.73 2055 version 5 peer-as
Example 2-Specifies the source address for outbound export J-Flow datagramshost1(config)#ip flow-export source fastEthernet 5/0
Use the no version to remove the export setting.
See ip flow-export.