[Contents] [Prev] [Next] [Index] [Report an Error]

E120 Router and E320 Router

To configure IP reassembly on an E120 router or an E320 router, you must install an ES2 4G line module (LM) with an ES2-S1 Service I/O adapter (IOA), or an IOA that supports the use of shared tunnel-server ports. For information about installing modules in these routers, see the E120 and 320 Hardware Guide.

The ES2 4G LM and ES2-S1 Service IOA combination provides a dedicated tunnel-server port that are always configured on the IOA. Unlike SMs, the ES2 4G LM requires the ES2-S1 Service IOA to condition it to receive and transmit data to other line modules. The ES2-S1 Service IOA also does not have ingress or egress ports.

You can also configure IP reassembly on IOAs that support shared tunnel-server ports. You can configure (provision) a shared tunnel-server port to use a portion of the IOA's bandwidth to provide tunnel services. For a list of the IOAs that support shared tunnel-server ports, see the E120 and 320 Module Guide.

For information about configuring tunnel services on dedicated and shared tunnel-server ports, see Managing Tunnel Service and IPSec Service Interfaces in JUNOSe Physical Layer Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]