Displaying Inside and Outside Rule Settings

The show ip nat inside rule and show ip nat outside rule commands display access list and pool usage for all dynamic translation rules configured for the virtual router. If you do not specify an access list, the output displays address pool associations for each of the access lists for either inside or outside translation rules in the virtual router. Specifying an access list filters the output to display only the address pool associated with the specified list.

show ip nat inside rule

• Use to display NAT access list and pool usage information for inside source translation rules.
• Field descriptions
  • access list name—Name of the access list
  • pool name—Name of the address pool
  • rule type—Type of rule assigned
• Example

  host1#show ip nat inside rule
  access list name: list1  pool name: poolA rule type: inside source
  access list name: list2  pool name: poolB rule type: inside source
  access list name: list3  pool name: poolC rule type: inside source overload

• See show ip nat inside rule.

show ip nat outside rule

• Use to display NAT access list and pool usage information for outside source translation rules.
• Field descriptions
  • access list name—Name of the access list
  • pool name—Name of the address pool
  • rule type—Type of rule assigned
• Example

  host1#show ip nat outside rule
  access list name: list4  pool name: poolD rule type: outside source

• See show ip nat outside rule.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.