Defining the ANCP Session Timeout

In L2C Configuration (config-l2c) mode, you can use the session-timeout command to specify the ANCP session timeout value. The timer range is 1–25 seconds with a default value of 25 seconds.

session-timeout

• Use to define the ANCP session timeout value (in seconds).
• Example

  host1(config-l2c)#session-timeout 10

• Use the no version to revert the session timeout to its default setting, 25 seconds.
• See session-timeout.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.