Configuring the Mobile IP Home Agent

To configure the Mobile IP home agent on a virtual router:

1. Configure a license for the Mobile IP home agent.
2. Configure the Mobile IP home agent settings.
3. Configure one or more mobile hosts.
4. Configure the Mobile IP security associations for mobile hosts.
5. Configure the Mobile IP security associations for foreign agents.
6. Assign an interface profile to be referenced by the Mobile IP home agent.
7. (Optional) Verify the Mobile IP configuration. See Monitoring the Mobile IP Home Agent.

The following example illustrates how you can configure a Mobile IP home agent on a virtual router named test:

ip mobile home-agent

• Use to configure the Mobile IP home agent on a virtual router.
• To specify the access control list (ACL) applied to the care-of address (CoA) that restricts access for foreign agents or networks, include the care-of-access keyword followed by the ACL name.
• To specify the interval within which the registration requests are established, include the lifetime keyword followed by the number of seconds, in the range 5–65535; the default value is 36,000 seconds.
• To specify the interval within which a registration can exceed the home agent configured value, include the replay keyword followed by the number of seconds, in the range 1–255; the default value is 7 seconds.
• To disable reverse tunneling support by the home agent for denying T bit registration requests, include the reverse-tunnel-off keyword; reverse tunneling is enabled by default.
• Example

  host1(config)#ip mobile home-agent care-of-access acl lifetime 2000 replay 255 reverse-tunnel-off

• Use the no version to disable the home agent service on the virtual router.

  Note: The values for lifetime, replay, and care-of-access configured per mobile host by using the ip mobile host command override the values configured by using the ip mobile home-agent command.

• See ip mobile home-agent.

ip mobile host

• Use to configure a mobile node on a virtual router with an optional host network access identifier (NAI) address or the home address (IP address of the home agent).
• To specify the mobile node, include the required nai keyword or the required address keyword, as follows:
  • To specify the NAI for the mobile node, include the nai keyword. You must choose one of the following formats, where user represents the user name and realm represents the domain name: user@realm, @realm, or @.
  • To specify a nonzero home address of the mobile node, include the address keyword followed by the IP address of the mobile node.
• To specify that the AAA server should validate registration requests and obtain configuration and security associations, include the aaa keyword.
• To specify the access control list applied to the care-of address that restricts access for foreign agents or networks, include the care-of-access keyword followed by the ACL name.
• To specify the interval within which the registration requests are established, include the lifetime keyword followed by the number of seconds, in the range 5–65535; the default value is 36,000 seconds.
• Example 1—This example illustrates local authentication of a mobile node; do not specify the aaa keyword for local authentication.

  host1(config)#ip mobile host 200.1.1.1 lifetime 200

  or

  host1(config)#ip mobile host nai @amazon.net

• Example 2—This example illustrates AAA authentication of a mobile node; you must specify the aaa keyword for AAA authentication.

  host1(config)#ip mobile host nai @yahoo.com aaa care-of-access acl2

  or

  host1(config)#ip mobile host nai bob@msn.net aaa lifetime 400

• Use the no version to delete the configuration of the mobile node on the virtual router.
• See ip mobile host.

ip mobile profile

• Use to configure or associate a preconfigured interface profile with the home agent in a virtual router.
• For information about configuring a virtual router, see the JUNOSe System Basics Configuration Guide.
• Example

  host1(config)#ip mobile profile virDefault

• Use the no version to remove the profile configuration from the virtual router.
• See ip mobile profile.

ip mobile secure foreign-agent

• Use to configure the security associations for a foreign agent.
• To specify a nonzero address for the foreign agent, include the IP address of the foreign agent.
• To specify the security parameter index (SPI) value to authenticate inbound requests and permit authentication for outbound registration requests, include the required spi keyword followed by a 4-octet hexadecimal number, in the range 0x100–0xFFFFFFFF.
• To specify the authentication key for this security association, include the required key keyword followed by either the hex keyword or the ascii keyword, as follows:
  • To specify a hexadecimal key, use the hex keyword followed by a 32-character (128-bit) hexadecimal value in the range 0x0–0xFFFFFFFE.
  • To specify an ASCII key, use the ascii keyword followed by an alphanumeric value up to a maximum of 16 characters (128 bits).
• To specify the number of seconds by which a registration request can exceed the time value configured on the home agent, include the optional replay timestamp within keywords followed by the number of seconds, in the range 1–255; the default value is 7 seconds.
• To specify the type of authentication algorithm for Mobile IP messages, include the optional algorithm keyword followed by either the hmac-md5 keyword or the keyed-md5 keyword.
• Example

  host1(config)#ip mobile secure foreign-agent 100.1.1.3 spi 256 key ascii secret replay timestamp within 255 algorithm hmac-md5

• Use the no version to delete the security associations for the specified foreign agent on the virtual router.
• See ip mobile secure foreign-agent.

ip mobile secure host

• Use to configure the security associations for a mobile node.
• You must configure security associations only for mobile nodes on which local authentication is configured.

  Note: If you delete a mobile node host by using the no ip mobile host command, all security associations that you configured for this host are deleted.

• To specify the mobile node, include the required nai keyword or the required address keyword, as follows:
  • To specify the network access identifier (NAI) for the mobile node, include the nai keyword. You must choose one of the following formats, where user represents the user name and realm represents the domain name: user@realm, @realm, or @.
  • To specify a nonzero home address of the mobile node, include the address keyword followed by the IP address of the mobile node.
• To specify the security parameter index (SPI) value to authenticate inbound requests and permit authentication for outbound registration requests, include the required spi keyword followed by a 4-octet hexadecimal number, in the range 0x100–0xFFFFFFFF.
• To specify the authentication key for this security association, include the required key keyword followed by either the hex keyword or the ascii keyword, as follows:
  • To specify a hexadecimal key, use the hex keyword followed by a 32-character (128-bit) hexadecimal value in the range 0x0–0xFFFFFFFE.
  • To specify an ASCII key, use the ascii keyword followed by an alphanumeric value up to a maximum of 16 characters (128 bits).
• To specify the number of seconds by which a registration request can exceed the time value configured on the home agent, include the optional replay timestamp within keywords followed by the number of seconds, in the range 1–255; the default value is 7 seconds.
• To specify the type of authentication algorithm for Mobile IP messages, include the optional algorithm keyword followed by either the hmac-md5 keyword or the keyed-md5 keyword.
• Examples

  host1(config)#ip mobile secure host 200.1.1.1 spi 0x398 key ascii w4ex algorithm keyed-md5 replay timestamp within 225

  or

  host1(config)#ip mobile secure host nai @amazon.net spi 0x100 key ascii pD4En algorithm keyed-md5 replay timestamp within 100

• Use the no version to delete the security associations for the specified host on the virtual router.
• See ip mobile secure host.

license mobile-ip home-agent

• Use to configure the license key to enable a home agent.
• Specify a name for the license key; up to a maximum of 16 alphanumeric characters.
• Example

  host1(config)#license mobile-ip home-agent demo

• Use the no version to delete the license key configuration.
• See license mobile-ip home-agent.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.