Configuring ANCP

This chapter describes how to configure Access Node Control Protocol (ANCP), also known as Layer 2 Control (L2C), for IP multicast on an E-series router; it contains the following sections:

• Overview
• Platform Considerations
• References
• Configuring ANCP
• Configuring ANCP Interfaces
• Configuring ANCP Neighbors
• Configuring Topology Discovery
• Configuring ANCP for QoS Adaptive Mode
• Triggering ANCP Line Configuration
• Adjusting the Data Rate Reported by ANCP for DSL Lines
• Configuring Transactional Multicast for IGMP
• Triggering ANCP OAM
• Monitoring ANCP

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.