 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
You can configure both dynamic and static IP tunnels in the same chassis.
A tunnel pair consists of two endpoints; one side encapsulates and the other side decapsulates. You can create a tunnel pair with two statically configured endpoints, two dynamically created endpoints, or with one static and one dynamic endpoint.
When configuring IP tunnels, you must consider that a tunnel is uniquely defined by its tunnel source, tunnel destination, transport virtual router, and mode (GRE or DVMRP). The system does not allow multiple tunnels with the same parameters. For example, when you configure a static tunnel with the same parameters as an existing dynamic IP tunnel, the system does not create the dynamic IP tunnel.
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |