Setting Route Tags

You can set IS-IS route tags in any of the following ways:

For instructions and examples on configuring IS-IS route tags, see the sections listed in Table 14.

Table 14: Configuration Tasks for Setting IS-IS Route Tags

To Learn About	Using This Command	See
Setting a route tag for an IS-IS passive interface	passive-interface	Configuring Passive Interfaces
Setting a route tag for an IS-IS interface	isis tag	Configuring Route Tags for IS-IS Interfaces
Setting a route tag for a route redistributed from another protocol to IS-IS by using an associated route map	redistribute	Configuring Redistribution
Setting a route tag for a route redistributed from one IS-IS level to another IS-IS level by using an associated route map	redistribute isis ip	Redistributing Routes Between Levels
Setting a route tag for an IS-IS default route by using an associated route map	default-information originate	Configuring Default Routes
Setting a route tag for an IS-IS summary address	summary-address	Summarizing Routes