Limiting Buffers per Virtual Router

The tcp resequence-buffers default-vr-maximum command and tcp resequence-buffers vr-maximum command enable you to limit the number of outstanding buffers on existing or newly established virtual routers.

tcp resequence-buffers default-vr-maximum

• Use to specify the default buffer limit assigned to all virtual routers when the virtual router is established.
• Specify a value of zero (0) to turn off the limit assignment.
• Example

  host1(config)#tcp resequence-buffers default-vr-maximum 200

• Use the no version to revert the virtual router maximum value to its default, 100 buffers.
• See tcp resequence-buffers default-vr-maximum

tcp resequence-buffers vr-maximum

• Use to define the maximum number of buffers that the current or specified virtual router can use.
• Specify a value of zero (0) to turn off the limit assignment.
• Example

  host1(config)#tcp resequence-buffers vr-maximum

• Use the no version to revert the virtual router maximum value to its default, 100 buffers.
• See tcp resequence-buffers vr-maximum

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.